Whirlpool K32010CB Replacement Fridge Filter Universal, Microfilter
Replaces Whirlpool External - Universal K32010CB
Availability:
In stock
Postage:
Delivery:
13,99 € (18,74 €)
Colissimo online tracking with signature on delivery
-
Description
-
Alternate
-
Quality
-
Specification
-
Fridges
-
Installation
-
Reviews
The K32010CB Universal water filter cartridge for Whirlpool fridges:
- is an external refrigerator water filter, today sold under the name DA2010CB
- is manufactured by Microfilter, original equipment manufacturer (OEM) for LG and Samsung, to the same specifications as the original LG 5231JA2010B and Samsung DA29-10105J water filters
- is a universal replacement water filter cartridge for all American style Side-by-Side refrigerators that use an external filter
- connector type water filter Quick push-in connecters (John Guest connectors)
- is designed to be installed on the 1/4" diameter cold water supply line to the refrigerator/icemaker
- is tested and Certified by NSF International against NSF/ANSI Standards 42
- manufacture recommends replacement every 6 months
- is manufactured by Microfilter Ltd. (country of origin Korea)
- EAN 4260211010045
The K32010CB fridge filter for Whirlpool fridges replaces or is compatible with the following filter part numbers:
- DA2010CB
- 4392949
- 4812 817 18629
- USC100
The K32010CB Microfilter water filter reduces the following health related contaminants:
- Chlorine Taste and Odour
- Particulate (Class III)
- Sediments
- Dirt
- Rust
Note: The filter produces better tasting water and ice.
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
The K32010CB Universal water filter operating specifications are as follows:
- Flow Rate
- Operating Temperature
- Operating Pressure
- Technology
- Capacity
- Service Life
- Dimensions
1.90 lpm
min 1°C / max 38°C
max 689.4 kPa (100 psi)
Active Carbon Block
3 000 litres
6 months
approximately 5 cm x 25.5 cm
The filter is for cold water use only.
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Change filter at least every 6 months.
The K32010CB Universal refrigerator filter is compatible with the following Whirlpool fridges:
Important: Some manufacturers use the same fridge model number for fridges supplied with both internal and external filter systems, please make sure that your fridge uses an External water filter before ordering this item.
Installation and replacement procedure for the K32010CB fridge water filter:
- Turn off the cold water supply.
- Remove the tubing from the ends of the old filter. Note: Take precautions as water will drain from the filter and pipes.
- Discard the old water filter.
- Align the new water filter with the water flow direction.
- Insert tube into the end of the filter that the flow arrow points until the tube stop.
- After inserting tube, put together the clip strongly.
- Repeat on the other end of the filter.
- Turn on the water supply.
- Use the fridge dispenser to ensure that any air pockets are removed.
- Check for any leaks.
- Please refer to our FAQs on how to reset the "change filter" indicator light for a particular fridge manufacturer.
When to change a filter: The filter cartridge should be replaced when the filter light comes on, or every 6 months, or if you notice a decrease in flow of water.
Important: It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacture's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty.